No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove smart_cache_partition file_system

remove smart_cache_partition file_system


The remove smart_cache_partition file_system command is used to remove a file system from a SmartCache partition.


remove smart_cache_partition file_system smart_cache_partition_id=? file_system_id_list=?





smart_cache_partition_id=? SmartCache partition ID.

To obtain the value, run "show smart_cache_partition general".

file_system_id_list=? File system ID list.

To obtain the value, run "show smart_cache_partition file_system smartcache_partition_id=x". X is the ID of a specific SmartCache partition.Multiple IDs are separated by commas (,), or ID range separated by hyphens (-), such as: 0,5-8.



Usage Guidelines

OceanStor 18500 V5, 18500 V5 Kunpeng, 18800 V5 and 18800 V5 Kunpeng storage systems support this command.


To remove file system 1 from SmartCache partition 0, run the following command.

admin:/>remove smart_cache_partition file_system smart_cache_partition_id=0 file_system_id_list=1
WARNING: You are about to remove file system 1 from the SmartCache partition 0. The deletion is irreversible.This operation deletes the relation-ship of the file system and the SmartCache partition from the system, and may affect file system performance.
Suggestion: Before performing this operation, ensure that you have selected the correct file system which is considered unnecessary.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Remove the file_system 1 from smart_cache_partition successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380115

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next