No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete ndmpcopy_task

delete ndmpcopy_task

Function

The delete ndmpcopy_task command is used to delete an ndmpcopy task.

Format

delete ndmpcopy_task task_id=?

Parameters

Parameter

Description

Value

task_id=? ID of the ndmpcopy task.

The value is an integer ranging from 0 to 18446744073709551615.

Level

Administrator

Usage Guidelines

Parameter "task_id" must be entered.

Example

Delete an ndmpcopy task.

admin:/>delete ndmpcopy_task task_id=24
CAUTION: You are about to delete a created ndmpcopy task. This operation may interrupt the running ndmpcopy task, and the backup and recovery will fail.
Suggestion: Before performing this operation, check that the ID of the task to be deleted is correct.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379998

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next