No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change storage_pool reconstruction_speed

change storage_pool reconstruction_speed

Function

change storage_pool reconstruction_speed command is used to change the reconstruction speed of a storage pool.

Format

change storage_pool reconstruction_speed reconstruction_speed=?

Parameters

Parameter

Description

Value

reconstruction_speed=? Reconstruction speed.

The value can be "Low", "Middle", or "High", where:

  • "Low": indicates the low speed.
  • "Middle": indicates the medium speed.
  • "High": indicates the high speed.

Level

Administrator

Usage Guidelines

None

Example

Change the reconstruction speed of a storage pool to "High".

admin:/>change storage_pool reconstruction_speed reconstruction_speed=High
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380746

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next