No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
test domain dns

test domain dns

Function

The test domain dns command is used to test the connectivity of the DNS server.

Format

test domain dns [ address=? ] [ controller=? ]

Parameters

Parameter

Description

Value

address=? IP address of the DNS server.

The value can be an IPv4 address or IPv6 address.

controller=? Controller ID.

The value format can be "XA", "XB", "XC" and "XD", where the value of X can be an integer ranging from 0 to 3. To obtain the value, run the show controller general command.

Level

Guest

Usage Guidelines

None

Example

Test the connectivity of the DNS server whose IP address is "10.148.105.124".

admin:/>test domain dns address=10.148.105.124 controller=0A
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 377648

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next