No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Information on Command Line Misentries

Information on Command Line Misentries

When you have misentered a segment of a command line, you can see the information on the misentry provided by the command line interface (CLI). This prompting function can visually indicate any misentries, facilitating location and correction.

When a command line introduces a misentry, the CLI spots the error bit with a ^ symbol so that you can quickly locate the rectify the fault. In the following example, the second segment introduced a misentry for letter a and a proposed value is provided by the CLI.

admin:/>add part 
port               port_group 

admin:/>add part

When a command line contains multiple misentries, only the initial misentry will be spotted.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 377074

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next