No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show bbu general

show bbu general

Function

The show bbu general command is used to query details on BBUs. Run this command if you need to query the ID, status and voltage of the controller where the BBU resides.

Format

show bbu general [ bbu_id=? ]

Parameters

Parameter

Description

Value

bbu_id=?

ID of a BBU.

To obtain the value, run "show bbu general" without parameters.

Level

Guest

Usage Guidelines

None

Example

  • Query details on all BBUs. The command output varies depending on a specific product.
    admin:/>show bbu general 
      
    ID Health Status Running Status Current Voltage(V) Number of Discharges 
    ------- ------------- -------------- ------------------ -------------------- 
    ENG0.A0 Normal Online 11.7 27 
    ENG0.A1 Normal Online 11.7 7 
    ENG0.B0 Normal Online 11.7 27 
    ENG0.B1 Normal Online 11.7 7
  • Query details on the BBU whose ID is "ENG0.A0". The ID and output vary depending on a specific product.
    admin:/>show bbu general bbu_id=ENG0.A0 
      
    ID : ENG0.A0 
    Health Status : Normal 
    Running Status : Online 
    Current Voltage(V) : 11.7 
    Number of Discharges : 27 
    Firmware Version : 1.17T18 
    Delivered On : 2012-4-29 
    Owning Controller : 0A 
    Electronic Label : [Board Properties] 
    BoardType=STLZ01PWRA 
    BarCode=210235G404Z0C5000218 
    Item=0235G404 
    Description=PANGEA,STLZ01PWRA,Battery Backup Unit 
    Manufactured=2012-05-19 
    VendorName=Huawei 
    IssueNumber=00 
    CLEICode= 
    BOM=

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

BBU ID.

Health Status

Health status of a BBU.

Running Status

Running status of a BBU.

Current Voltage(V)

Current voltage of the BBU (V).

Number Of Discharges

Times of BBU discharge.

Firmware Version

Firmware version of the BBU.

Delivered On

Delivery time of the BBU.

Owning Controller

Owning controller of the BBU.

Electronic Label

Electronic label of the BBU.

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 333127

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next