No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show enclosure

show enclosure

Function

The show enclosure command is used to query details on the engine and disk enclosure.

Format

show enclosure [ enclosure_id=? ]

Parameters

Parameter

Description

Value

enclosure_id=?

ID of an engine or disk enclosure.

To obtain the value, run "show enclosure" without parameters.

Level

Guest

Usage Guidelines

  • To query details on all engines and disk enclosures, run show enclosure.
  • To query details on a specific engine or disk enclosure, run show enclosure enclosure_id=?.

Example

  • Query details on all engines and disk enclosures. The command output varies depending on a specific product.
    admin:/>show enclosure 
    ID Logic Type Health Running Type Temperature 
    Status Status (Celsius) 
    ------ ------------------ ------ ------ ------------------------ ----------- 
    ENG0 Engine Normal Online BMC Controller Enclosure 50 
    DAE000 Expansion Enclosure Normal Online 4U SAS 24 Slot 28
  • Query details on the engine whose ID is "ENG0". The command output varies depending on a specific product.
    admin:/>show enclosure enclosure_id=ENG0 
      
    ID : ENG0 
    Logic Type : Engine 
    Health Status : Normal 
    Running Status : Online 
    Location : SMB0.20U 
    Type : BMC Controller Enclosure 
    Temperature(Celsius) : 50 
    SN : -- 
    MAC : -- 
    Height(U) : 4 
    Expansion Depth : 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Enclosure ID.

Logic Type

Logical type of the enclosure.

MAC

MAC address of the enclosure.

Electronic Label

Electronic label of the enclosure.

Expansion Depth

Expansion depth of the enclosure.

Height(U)

Enclosure height.

SN

Enclosure SN.

Temperature(Celsius)

Enclosure temperature (°C).

Type

Enclosure type.

Running Status

Running status of the enclosure.

Health Status

Health status of the enclosure.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 311078

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next