No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove smartqos_policy file_system

remove smartqos_policy file_system


The remove smartqos_policy file_system command is used to remove file systems from a specific SmartQoS policy.


remove smartqos_policy file_system smartqos_policy_id=? file_system_id_list=?





smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

file_system_id_list=? IDs of the file systems that you want to remove.

To obtain the value, run "show smartqos_policy general".

You can specify multiple file system IDs separated by commas (,), or ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 64 IDs are allowed.



Usage Guidelines



Remove file systems "3", "4", and "5" from SmartQoS policy "0".

admin:/>remove smartqos_policy file_system smartqos_policy_id=0 filesystem_id_list=3,4,5
WARNING: You are about to remove file system from traffic control policy.
This operation may affect file system performance.
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and file system are selected.
Have you read warning message carefully?(y/n)y
Are you sure really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381061

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next