No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot activate

change snapshot activate

Function

The change snapshot activate command is used to activate snapshots.

Format

change snapshot activate snapshot_id_list=?

Parameters

Parameter

Description

Value

snapshot_id_list=? ID of a snapshot.

To obtain the value, run "show snapshot general".

You can specify multiple snapshot IDs separated by commas (,), or range separated by hyphens (-), such as:0,5-8.

A maximum of 8192 snapshot IDs are allowed.

Level

Administrator

Usage Guidelines

  • Only the snapshots in the state of inactive can be activated.
  • Multiple snapshots on different source LUNs can be activated in the mean time, but you cannot activate multiple snapshots on a source LUN at the same time.

Example

  • Activate snapshot "10".

    admin:/>change snapshot activate snapshot_id_list=10
    WARNING: You are about to activate snapshot.
    Suggestion: Before performing this operation, ensure that the storage pool capacity is sufficient.
    Have you read warning message carefully?(y/n)y
     
    Are you sure you really want to perform the operation?(y/n)y
    Activate snapshot successfully.
  • Activate snapshots "7", "8", and "9".

    admin:/>change snapshot activate snapshot_id_list=7,8,9
    WARNING: You are about to activate snapshot.
    Suggestion: Before performing this operation, ensure that the storage pool capacity is sufficient.
    Have you read warning message carefully?(y/n)y
     
    Are you sure you really want to perform the operation?(y/n)y
    Activate snapshot successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 376998

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next