No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication general

show remote_replication general


The show remote_replication general command is used to query information about remote replication pairs.


show remote_replication general [ remote_replication_id=? ]





remote_replication_id=? ID of a remote replication pair.

To obtain the value, run "show remote_replication general" without parameters.



Usage Guidelines

  • To query the basic information about all the remote replication pairs, run "show remote_replication general".
  • To query the details about a specific remote replication pair, run "show remote_replication general remote_replication_id=?".


  • Query basic information about all the remote replication pairs.

      admin:/>show remote_replication general 
      ID                Health Status  Running Status  Is Primary  Replication Mode  Compress Enable  Compress Valid  Time Difference   DR Star ID    
      ----------------  -------------  --------------  ----------  ----------------  ---------------  --------------  ---------------   ----------     
      74a063f95e340004  Normal         Normal          Yes         Asynchronous      No               No                00:25:59        1a212d4a5e6b000e   
      74a063f95e340007  Normal         Normal          Yes         Synchronous       No               No                00:25:59        --        
  • Query details about remote replication pair "74a063f95e340004".

    admin:/>show remote_replication general remote_replication_id=74a063f95e340004
    ID: 74a063f95e340004
    Health Status: Normal
    Running Status: Normal
    Is Primary: Yes
    Local LUN ID: 31
    Local LUN Name: LUN_3dc_c10000
    Remote Device ID: 1
    Remote Device SN: 2102350BSJ2583012525
    Remote Device Name: Huawei.Storage
    Remote LUN ID: 14
    Remote LUN Name: LUN_3dcc20000
    Primary LUN Capacity: 16.000GB
    Synchronization Type: Manual
    Recovery Policy: Automatic
    Replication Mode: Asynchronous
    Progress(%): 100
    Start Time: 2016-04-19/16:00:33 UTC+08:00
    End Time: 2016-04-19/16:00:33 UTC+08:00
    Rate: Middle
    Timing Length: --
    Primary LUN Data Status : Consistent
    Second LUN Data Status: Consistent
    Second LUN Access: Read Only
    Is Restore: No
    Is In Consistency Group : Yes
    Consistency Group ID: 74a063f95e34000c
    Consistency Group Name: ConsistentGroup013
    Is Data Sync: Yes
    Compress Enable: No
    Compress Valid: No
    Remote I/O Timeout Period(s) : -- 
    Time Difference: 00:26:10
    Time Remaining for Synchronization: 00:00:00
    DR Star ID     : 1a212d4a5e6b000f
    Replication Type: Cloud

System Response

The following table describes the parameter meanings.




Remote replication ID.

Health Status

Health status.

Running Status

Running status.

Is Primary

Whether it is the primary end of the remote replication.

Local LUN ID

Primary LUN ID.

Local LUN Name

Primary LUN name.

Remote Device ID

Remote device ID.

Remote Device SN

Serial number of the remote device.

Remote Device Name

Remote device name.

Remote LUN ID

Remote LUN ID.

Remote LUN Name

Remote LUN name.

Primary LUN Capacity

Primary LUN capacity.

Synchronization Type

Synchronization type.

Recovery Policy

Recovery policy.

Replication Mode

Remote replication mode.


Progress of remote replication.

Start Time

Start time of remote replication.

End Time

End time of remote replication.


Synchronization rate.

Timing Length

Timing period (data synchronization period).

Primary LUN Data Status

Primary LUN data status.

Second LUN Data Status

Secondary LUN data status.

Second LUN Access

Secondary LUN access permission.

Is Restore

Whether the secondary LUN is in the rollback state.

Is In Consistency Group

Whether the remote replication pair belongs to a consistency group.

Consistency Group ID

ID of the consistency group to which the remote replication pair belongs.

Consistency Group Name

Name of the consistency group to which the remote replication pair belongs.

Is Data Sync

Whether the data on the primary and secondary LUNs is consistent.

Compress Enable

Whether compression is enabled.

Compress Valid

Whether compression is valid.

Remote I/O Timeout Period(s)

Remote I/O timeout period (s).

Time Difference

Time difference between the data synchronization points in time of the primary and secondary resources in a synchronization period of a remote replication pair.

Time Remaining for Synchronization

Time remaining for synchronization.

DR Star ID

DR Star ID.

Replication Type

Type of remote replication (cloud-based remote replication or common remote replication).

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 376914

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next