No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port general

show port general

Function

The show port general command is used to query ports on the storage system.

Format

show port general [ port_id=? ]

show port general [ physical_type=? | logic_type=? | running_status=? ] *

show port general [ failover_group_id=? ]

Parameters

Parameter

Description

Value

port_id=? ID of a port. If this parameter is specified, neither physical_type=? nor logic_type=? can be specified.

To obtain the value, run "show port general" without parameters.

logic_type=? Logical port type.

The value can be "Host_Port", "Expansion_Port", "Management_Port", "Maintenance_Port", or "IP_Scale_Out", where:

  • "Host_Port": host port.
  • "Expansion_Port": expansion port.
  • "Management_Port": management network port.
  • "Maintenance_Port": maintenance network port.
  • "IP_Scale_Out": network port for IP Scale-out.
physical_type=? Physical port type.

The value can be "FC", "ETH", "SAS", "COM", "FCoE", or "PCIE", where:

  • "FC": Fibre Channel port.
  • "ETH": Ethernet ports (including the iSCSI host port and management network ports).
  • "SAS": SAS port.
  • "COM": serial port.
  • "FCoE": FCoE ports.
  • "PCIE": PCIe ports.
failover_group_id=? ID of the failover group.

The value must be an integer from 0 to 8191.

running_status=? Running status of a port.

The value can be "link_up" or "link_down", where:

  • "link_up": The port link is up.
  • "link_down": The port link is down.

Level

Guest

Usage Guidelines

  • To query all ports, run "show port general".
  • To query a specific port, run "show port general port_id=?".
  • To query ports of a specific type, run "show port general physical_type=?", "show port general logic_type=?", or "show port general physical_type=? logic_type=?".
  • To query Ethernet ports in a specified failover group, run "show port general failover_group_id=?". Fibre Channel ports in a failover group cannot be queried.
    If you use a maintenance terminal to log in to the storage system through a serial port and find that "Running Status" of the queried serial port is "Link Down", ignore the status.
  • To query details on ports of a specific type, run "show port general physical_type=?", "show port general logic_type=?", "show port general running_status=?", "show port general physical_type=? logic_type=?", "show port general physical_type=? running_status=?", "show port general logic_type=? running_status=?", or "show port general physical_type=? logic_type=? running_status=?".
If you use a maintenance terminal to log in to the storage system through a serial port and find that "Running Status" of the queried serial port is "Link Down", ignore the status.

port_id is mutually exclusive with logic_type and physical_type; failover_group_id is mutually exclusive with physical_type, logic_type, and port_id.

Example

  • Query the port whose ID is "CTE0.A.IOM1.P1". The ID and output vary depending on a specific product.

    admin:/>show port general port_id=CTE0.A.IOM1.P1
    ETH port:
    ---------------  Host Port:----------------
      ID                               : CTE0.A.IOM1.P1               
      Health Status                    : Normal                       
      Running Status                   : Link Down                    
      Type                             : Host Port                    
      IPv4 Address                     : --                           
      Subnet Mask                      : --                           
      IPv4 Gateway                     : --                           
      IPv6 Address                     : --                           
      IPv6 Prefix Length               : --                           
      IPv6 Gateway                     :                              
      MAC                              : 48:fd:8e:05:8b:ae            
      Role                             : INI and TGT                  
      Mode                             : --                           
      MTU                              : 1500                         
      Working Rate(Mbps)               : --                           
      Bond Name                        :                              
      iSCSI Port                       : 0                            
      iSCSI Name                       :                              
      Error Packets                    : 0                            
      Lost Packets                     : 0                            
      Over Flowed Packets              : 0                            
      Start Time                       : 2016-11-08/21:38:57 UTC+08:00 
      Enabled                          : Yes                          
      Max Speed(Mbps)                  : 10000                        
      Running Type                     : Host                         
      CRC Errors                       : 0                            
      Frame Errors                     : 0                            
      Frame Length Errors              : 0                            
      Total Received Packets           : 0                            
      Total Transmitted Packets        : 0                            
      Total Received Bytes             : 0.000B                       
      Total Transmitted Bytes          : 0.000B                       
      Received Packets Per Second      : 0                            
      Transmitted Packets Per Second   : 0                            
      Received Bytes Per Second        : 0.000B                       
      Transmitted Bytes Per Second     : 0.000B 
      Number Of Initiators :  0                   
      Work Mode                        : 25GE_NOFEC
    FCoE port:
    ID                  : CTE0.A.IOM1.P1               
      Health Status       : Normal                       
      Running Status      : Link Down                    
      Type                : Host Port                    
      Working Rate(Mbps)  : --                           
      WWN                 : 2009e4a8b61a0893             
      Role                : TGT                          
      SFP Status          : Not Exist                    
      Error Packets       : 0                            
      Lost Packets        : 0                            
      Over Flowed Packets : 0                            
      Start Time          : 2016-11-08/21:38:57 UTC+08:00 
      Enabled             : Yes                          
      Max Speed(Mbps)     : 10000                        
      CRC Errors          : 0                            
      Frame Errors        : 0                            
      Frame Length Errors : 0
      Number Of Initiators :  0
  • Query Ethernet ports in the failover group whose ID is 0.

    admin:/>show port general failover_group_id=0
    ID Health Status Running Status Type IPv4 Address IPv6 Address MAC Role Working Rate(Mbps) 
    ---------- ------------- -------------- --------- ------------ ------------ ----------------- ---- ------------------ 
    ENG0.A3.P0 Normal Link Up Host Port -- 80:fb:06:df:d1:71 -- 1000 
    ENG0.A3.P1 Normal Link Down Host Port -- 80:fb:06:df:d1:70 -- -- 
    ENG0.A3.P2 Normal Link Down Host Port -- 80:fb:06:df:d1:6f -- -- 
    ENG0.A3.P3 Normal Link Down Host Port -- 80:fb:06:df:d1:6e -- -- 
    ENG0.B2.P0 Normal Link Down Host Port -- 78:1d:ba:cb:1d:cc -- -- 
    ENG0.B2.P1 Normal Link Down Host Port -- 78:1d:ba:cb:1d:cd -- -- 
    ENG0.B3.P1 Normal Link Down Host Port -- 20:0b:c7:3e:82:1a -- -- 
    ENG0.B3.P2 Normal Link Down Host Port -- 20:0b:c7:3e:82:19 -- --
  • Query the Fibre Channel port whose ID is "CTE0.A4.P0". The ID and output vary depending on a specific product.

    admin:/>show port general port_id=CTE0.A4.P0
    FC port:
      ID                         : CTE0.A4.P0                   
      Health Status              : Normal                       
      Running Status             : Link Down                    
      Type                       : Host Port                    
      Working Rate(Mbps)         : --                           
      Configured Speed(Mbps)     : Auto-Adapt                   
      WWN                        : 2400002211335544             
      Role                       : INI and TGT                  
      SFP Status                 : Offline                      
      Working Mode               : --                           
      Configured Mode            : Auto-Adapt                   
      Flogin Delay Times(ms)     : 0                            
      Lost Signals               : 0                            
      Link Errors Codes          : 0                            
      Lost Synchronizations      : 0                            
      Failed Connections         : 0                            
      Start Time                 : 2016-07-05/09:31:43 UTC+08:00 
      Fast Write Supported       : Yes                          
      Fast Write Enable          : No                           
      Fast Write Burst Len(Byte) : 16384                        
      Enabled                    : Yes                          
      Max Speed(Mbps)            : 16000                        
      CRC Errors                 : 4                            
      Frame End Sign Errors      : 24
      Number Of Initiators                : 2
      FC MOR State               : Open
  • Query the port whose ID is "CTE0.A.IOM0.P0". The ID and output vary depending on a specific product.

    admin:/>show port general port_id=CTE0.A.IOM0.P0
    ETH port:
    ---------------  Host Port:----------------
      ID                               : CTE0.A.IOM0.P0               
      Health Status                    : Normal                       
      Running Status                   : Link Up                      
      Type                             : Host Port                    
      IPv4 Address                     : --                           
      Subnet Mask                      : --                           
      IPv4 Gateway                     : --                           
      IPv6 Address                     : --                           
      IPv6 Prefix Length               : --                           
      IPv6 Gateway                     :                              
      MAC                              : 04:f9:38:95:88:d9            
      Role                             : INI and TGT                  
      Mode                             : Duplex                       
      MTU                              : 1500                         
      Working Rate(Mbps)               : 1000                         
      Bond Name                        :                              
      iSCSI Port                       : 0                            
      iSCSI Name                       :                              
      Error Packets                    : 0                            
      Lost Packets                     : 0                            
      Over Flowed Packets              : 0                            
      Start Time                       : 2016-11-08/21:38:56 UTC+08:00 
      Enabled                          : Yes                          
      Max Speed(Mbps)                  : 1000                         
      Running Type                     : Host                         
      CRC Errors                       : 0                            
      Frame Errors                     : 0                            
      Frame Length Errors              : 0                            
      Total Received Packets           : 294431                       
      Total Transmitted Packets        : 994                          
      Total Received Bytes             : 28.134MB                     
      Total Transmitted Bytes          : 83.589KB                     
      Received Packets Per Second      : 8                            
      Transmitted Packets Per Second   : 0                            
      Received Bytes Per Second        : 420.000B                       
      Transmitted Bytes Per Second     : 0.000B
      Work Mode                        : 25GE_NOFEC
  • Query the PCIe port whose ID is "CTE0.R3.IOM0.P0". The ID and output vary depending on a specific product.

    admin:/>show port general port_id=CTE0.R3.IOM0.P0
    PCIE port:
    ID                   : CTE0.R3.IOM0.P0              
      Health Status        : Normal                       
      Running Status       : Link Up                      
      PCIE Speed(Mbit/s)   : 5000                         
      Current Peer Port Id : 143833714183790592           
      Suggest Peer Port Id : 143833714183790592           
      Lost Signals         : 0                            
      ECRC Error           : 0                            
      Bad Tlp              : 0                            
      Bad Dllp             : 0                            
      Recv Error           : 0                            
      Chip Ecc Error       : 0                            
      Start Time           : 2017-02-15/14:11:37 UTC+08:00 
      Max Speed(Mbps)      : 5000 
      Replay Timer Timeout : 0
      Rollover             : 0
      Model                : 4*5Gb PCIe Port

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of a port.

Health Status

Health status of a port.

Running Status

Running status of a port.

Type

Port type.

IPv4 Address

IPv4 address of an ETH port.

IPv6 Address

IPv6 address of an ETH port.

MAC

MAC address of an ETH port.

Role

Role of a port in the link.

Working Rate(Mbps)

Working rate of a port.

Enabled

Whether the port is enabled.

Max Speed(Mbps)

Maximum working rate of a port.

WWN

WWN of a port.

Channel Number

Channel number of a port.

Replay Timer Timeout

Count of replay timer timeout.

Rollover

Count of replay counter rollover.

Number Of Initiators

Number of initiators.

Model

PCIe port model.

FC MOR State

Whether the MOR function of a Fibre Channel port is enabled.

Work Mode

Work mode of an Ethernet port.

Flogin Delay Times(ms)

Delay time that the system waits before sending the FLOGIN command.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379238

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next