No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change smartqos_policy enabled

change smartqos_policy enabled

Function

The change smartqos_policy enabled command is used to enable or disable a specific SmartQoS policy.

Format

change smartqos_policy enabled smartqos_policy_id=? enabled=?

Parameters

Parameter

Description

Value

smartqos_policy_id=?

ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

enabled=?

Switch for SmartQoS policies.

The value can be:

  • "yes": SmartQoS policies will be enabled.
  • "no": SmartQoS policies will be disabled.

Level

Administrator

Usage Guidelines

After creating a SmartQoS policy, you must run this command to enable the policy so that the settings associated with the policy can take effect.

Example

  • Enable SmartQoS policy "3".
    admin:/>change smartqos_policy enabled smartqos_policy_id=3 enabled=yes 
    CAUTION: You are about to activate traffic control policy. 
    This operation may affect the performance of storage objects. 
    Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the traffic control policy is correctly configured. 
    Do you wish to continue?(y/n)y 
    Command executed successfully.
  • Disable SmartQoS policy "0".
    admin:/>change smartqos_policy enabled smartqos_policy_id=0 enabled=no 
    CAUTION: You are about to deactivate traffic control policy. 
    This operation may affect the performance of storage objects. 
    Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy is selected. 
    Do you wish to continue?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 321911

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next