No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance ip_port

show performance ip_port


The show performance ip_port command is used to query the performance statistics on a back-end port. Run this command to analyze the performance statistics on a port in real time.


show performance ip_port port_id=?

show performance ip_port port_id_list=?





port_id=? ID of a port on which you want to query performance statistics.

To obtain the value, run "show port general physical_type=RDMA".

port_id_list=? ID list of ports on which you want to query performance statistics.
  • To obtain the value, run "show port general physical_type=RDMA".
  • Separate the port IDs with commas (,).
  • A maximum of 50 IDs can be queried.



Usage Guidelines

  • You will be prompted with optional performance statistics categories upon running this command. In this condition, typing a number or multiple numbers (separated by commas) for the selected categories and pressing "Enter" display the performance statistics for those categories.
  • By default, performance statistics will be refreshed every three seconds. To refresh performance statistics instantly, press "Enter".
  • Typing "q" on the command line interface (CLI) exits the active performance statistics display.


Query the performance statistics on the read I/Os flowing through port P0 on interface module "6" that resides on controller "1" of controller enclosure "0". The command output varies depending on a specific product.

admin:/>show performance ip_port port_id=CTE0.IOM.H6.P0
0.Bandwidth(MB/s) / Block Bandwidth(MB/s)    1.Throughput(IOPS)(IO/s)                     2.Average I/O Latency(us)                    
Input item(s) number separated by comma:

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381680

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next