No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk routine_test

change disk routine_test

Function

change disk routine_test command is used to set the status and period for a routine disk test.

Format

change disk routine_test enable_routine_test=? [ routine_test_period=? ]

Parameters

Parameter

Description

Value

enable_routine_test=?

Status of a routine disk test.

Possible values are:

  • "on": A routine disk test is enabled.
  • "off": A routine disk test is disabled.

routine_test_period=?

Period of a routine disk test. This parameter is available only when enable_routine_test=? is set to "on".

The value is an integer ranging from 0 to 2,147,483,647. The default unit is minute.

Level

Administrator

Usage Guidelines

None

Example

Enable a routine disk test and set the test period to 60 minutes.

admin:/>change disk routine_test enable_routine_test=on routine_test_period=60 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 312627

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next