No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reboot storage service

reboot storage service


The reboot storage service command is used to restart storage system services.


reboot storage service service_name=? [ controller_id=? ]





service_name=? Name of the service to be restarted.

The value of "service_name" is "DeviceManager".

controller_id=? ID of a controller.The parameter is not supported on SVP.

The value is in the format of "XA","XB","XC","XD", where the "X" is an integer ranging from 0 to 3, for example: "0A".



Usage Guidelines

1. Run the reboot storage service service_name=DeviceManager command to restart the DeviceManager service on all online controllers.

2. Run the reboot storage service service_name=DeviceManager [ controller_id=? ] command to restart the DeviceManager service on a specific controller.


Restart the DeviceManager service on all online controllers.

admin:/>reboot storage service service_name=DeviceManager
DANGER: You are about to restart the DeviceManager for the storage system.
This operation causes the DeviceManager unavailable temporarily. 
Suggestion: Before performing this operation, ensure that all users have exited the DeviceManager.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379746

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next