No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show iscsi target_name

show iscsi target_name

Function

The show iscsi target_name command is used to query the name of the iSCSI target configured for the storage system.

Format

show iscsi target_name [ eth_port_id=? ]

Parameters

Parameter

Description

Value

eth_port_id=?

ID of a port.

To obtain the value, run "show port general".

Level

Guest

Usage Guidelines

Initiators and targets are relative. In the scenario where storage systems A and B connect to each other in iSCSI mode, from the perspective of storage system A, storage system A is the initiator and storage system B is the target. Likewise, from the perspective of storage system B, storage system B is the initiator and storage system A is the target.

Example

To query the name of the iSCSI target configured for the storage system, run the following command:

admin:/>show iscsi target_name 

  iSCSI Target Name : iqn.2006-08.com.huawei:oceanstor:21000022a10515fe:configa

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 329091

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next