No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance file_system

show performance file_system

Function

The show performance file_system command is used to show the performance statistics of a file system.

Format

show performance file_system file_system_id=?

show performance file_system file_system_id_list=?

Parameters

Parameter

Description

Value

file_system_id=?

File system ID.

To obtain the value, run "show file_system general" without parameters.

file_system_id_list=?

ID list of file systems.

  • To obtain the value, run "show file_system general" without any parameters.
  • Separate multiple IDs with commas (,). Consecutive IP addresses can be represented by a hyphen (-).
  • A maximum of 50 IDs can be queried.

Level

Guest

Usage Guidelines

  • After this command is executed, performance data categories are displayed. You need to type the serial numbers before categories and press "Enter" to view the specific categories of performance data (If you need to type multiple categories, use commas to separate them. Consecutive IDs can be represented by a hyphen).
  • Performance statistics is updated in real time.
  • You can type "q" on the command line interface (CLI) to exit the page that shows performance statistics.

Example

Show the performance statistics of file system "6".

admin:/>show performance file_system file_system_id=6 
0.Read Bandwidth(MB/s) 
1.Write Bandwidth(MB/s) 
2.OPS(per second) 
3.Read OPS(per second) 
4.Write OPS(per second) 
5.Service time(us) 
6.Average Read OPS Response Time (us) 
7.Average Write OPS Response Time (us) 
8.The cumulative count of file I/O operations for the object,including metadata I/O operations 
9.The cumulative count of bytes transferred for all of the file I/O operations as defined in the "TotalIOs" property 
10.The cumulative count of file I/O operations that were directed to the object and that performed a transfer of data from the file contents 
11.The cumulative count of file I/O operations that were directed to the object and that performed a transfer of data to the file contents 
12.The cumulative count of file I/O operations that were directed to the object and that did not perform a transfer of data either to or from the file contents 
13.Cache page preservation(%) 
14.Cache chunk preservation(%) 
15.Average Read I/O Size(KB) 
16.Average Write I/O Size(KB) 
17.Average IO Size 
Input item(s) number separated by comma:5 
  Service time(us) : 0

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 316878

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next