No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
scan remote_lun

scan remote_lun

Function

The scan remote_lun command is used to scan for LUNs on a third-party storage system. When a LUN mapping is added to or deleted from a remote disk array, or an initiator is added to or deleted from a host group, you must manually run this command.

Format

scan remote_lun [ remote_device_id=? ] [ link_type=? ] [ link_id=? ]

Parameters

Parameter

Description

Value

remote_device_id=?

ID of a remote device.

To obtain the value, run "show remote_device general".

link_type=?

Link type.

Values:

  • FC: A remote device is connected to a local device by Fibre Channel links.
  • iSCSI: A remote device is connected to a local device by iSCSI links.

link_id=?

Link ID.

Run the "show remote_device elink" command without any parameters to obtain the value.

Level

Administrator

Usage Guidelines

When the LUN mapping of a remote disk array changes, the local disk array cannot sense the change. You need to manually scan for LUNs on the local storage system and update the LUN mapping change of the remote disk array in a timely manner. Therefore, when a LUN mapping is added to or deleted from a remote disk array, or an initiator is added to or deleted from a host group, you must manually run this command.

Example

Scan for LUNs on a third-party storage system.

admin:/>scan remote_lun 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 319509

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next