No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete file

delete file

Function

The delete file command is used to delete exported files from the system memory or system disk.

Format

delete file filetype=? [ interlog_name=? ] [ controller_id=? ]

Parameters

Parameter

Description

Value

filetype=?

Type of the file.

The value can be "event", "log", "running_data", "configuration_data", "all_log", "smart", "workload", "call_home", "isolated_disklog", "running_disklog" or "diagnostic_file", where:

  • "event": event files.
  • "log": log files.
  • "running_data": system running data files.
  • "configuration_data": system configuration files.
  • "all_log": all logs of the system.
  • "smart": disk smart information.
  • "workload": workload (only supported by the storage array).
  • "call_home": Call Home data.
  • "isolated_disklog": isolated disklog info.
  • "running_disklog": running disklog info.
  • "diagnostic_file": diagnostic file.

controller_id=?

Controller ID.

Controller IDs are separated by commas (,), and the value is in the format of "XA","XB","XC","XD", where the "X" is an integer from 0 to 3, for example: "0A","1C". This parameter can be specified only when "filetype" is set to "log", "all_log", "call_home", "smart", "isolated_disklog", "running_disklog" or "workload". Note that if the command does not have this parameter, all downloaded log files will be deleted.

interlog_name=?

Exported running disklog name.

This parameter can be specified only when "filetype" is set to "running_disklog".

Level

Administrator

Usage Guidelines

None

Example

  • Delete exported event files from the system memory.
    admin:/>delete file filetype=event 
    Command executed successfully.
  • Delete exported running disklog files.
    admin:/>delete file filetype=running_disklog interlog_name=CTE1.1_210235G7JK10D7000085.tgz controller_id=1A 
    Command executed successfully.
  • Delete the exported diagnostic file.
    admin:/>delete file filetype=diagnostic_file 
    Command executed successfully. 
     

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 310902

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next