No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add kmc test

add kmc test


The add kmc test command is used to test the connectivity of an external key management server.


add kmc test port=? { kmc_server_ip=? | kmc_server_domain_name=? } [ type=? ]





kmc_server_ip=? IP address of the external key management server.


kmc_server_domain_name=? Domain name of the external key management server.

The domain name is a case-insensitive string of 1 to 255 characters, including letters, digits and hyphens (-). Domain names at various levels are separated by periods (.). Hyphens (-) cannot be the start or end of the domain name.

port=? Port number of the external key management server.

The value ranges from 1 to 65535.

type Type of the external key management server.

The value can be "Thales_kmip" or "SafeNet_kmip", where:

  • "Thales_kmip": Thales external key management server.
  • "SafeNet_kmip": SafeNet external key management server.
The default value is "Thales_kmip".



Usage Guidelines

  • Parameters "kmc_server_ip" and "kmc_server_domain_name" are mutually exclusive.


Test the connectivity of an external key management server.

admin:/>add kmc test port=5696 kmc_server_ip= type=Thales_kmip
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382942

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next