No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_vstore_pair general

show hyper_metro_vstore_pair general


The show hyper_metro_vstore_pair general command is used to query HyperMetro vStore pairs.


show hyper_metro_vstore_pair general pair_id=?






ID of the HyperMetro vStore pair.

Run the "show hyper_metro_vstore_pair general" command to obtain the value.



Usage Guidelines



  • Query all HyperMetro vStore pairs in the device.
    admin:/>show hyper_metro_vstore_pair general 
    ID         Health Status  Running Status Role      Local Vstore ID  Local Vstore Name  Remote Vstore ID  Remote Vstore Name  Config Status Active/Passive 
    ---------------  ------------- --------------  -----      ---------------  -----------------  ----------------  ------------------  ----------------  -------------- 
    200bc79b99520000  Normal      Normal       Preferred 1        VSTORE001       1          RMVSTORE001      Normal            Active 
    200bc79b99520001  Normal      Normal       Non-preferred 2          VSTORE002       2          RMVSTORE002      Normal            Active
  • Query HyperMetro vStore pair "200bc79b99520000".
    admin:/>show hyper_metro_vstore_pair general pair_id=200bc79b99520000 
    ID                 : 4bd70e359f1c000       
    Health Status      : Normal                
    Link Status        : Linkup                
    Running Status     : Normal                
    Domain Id          : 4bd70e359f10100       
    Domain Name        : HCD001          
    Role               : Preferred                
    Local Vstore ID : 1                     
    Local Vstore Name  : VSTORE001               
    Remote Vstore ID : 1                     
    Remote Vstore Name : RMVSTORE001              
    Config Status      : Normal 
    Active/Passive     : Active  
    Preferred Mode     : Along With Active

System Response

The following table describes the parameter meanings.




ID of the HyperMetro vStore pair, 64 bits.

Health Status

Health status: Normal or Fault.

Running Status

Running status: Normal, Unsynchronized, Forced Start, Invalid.

Config Status

Configured synchronization status: Normal, Synchronizing, To Be Synchronized.

Link Status

Link status: Linkup or Linkdown.

Domain ID

ID of the HyperMetro domain.

Domain Name

Name of the HyperMetro domain.


Whether it is the preferred site.

Local Vstore ID

ID of the local vStore.

Local Vstore Name

Name of the local vStore.

Remote Vstore ID

ID of the remote vStore.

Remote Vstore Name

Name of the remote vStore.


Active or passive.

Preferred mode

Mode of setting the preferred site.

Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 328723

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next