No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_vstore_pair general

show hyper_metro_vstore_pair general


The show hyper_metro_vstore_pair general command is used to query HyperMetro vStore pairs.


show hyper_metro_vstore_pair general pair_id=?





pair_id=? ID of the HyperMetro vStore pair.

Run the "show hyper_metro_vstore_pair general" command to obtain the value.



Usage Guidelines



  • Query all HyperMetro vStore pairs in the device.

    admin:/>show hyper_metro_vstore_pair general
    ID         Health Status  Running Status   Role      Local Vstore ID  Local Vstore Name  Remote Vstore ID  Remote Vstore Name  Config Status    Active/Passive  
    ---------------  -------------   --------------  -----      ---------------  -----------------  ----------------  ------------------  ----------------  --------------
    200bc79b99520000  Normal      Normal       Preferred    1          VSTORE001       1          RMVSTORE001      Normal            Active
    200bc79b99520001  Normal      Normal       Non-preferred 2          VSTORE002       2          RMVSTORE002      Normal            Active
  • Query HyperMetro vStore pair "200bc79b99520000".

    admin:/>show hyper_metro_vstore_pair general pair_id=200bc79b99520000
    ID                 : 4bd70e359f1c000      
    Health Status      : Normal               
    Link Status        : Linkup               
    Running Status     : Normal               
    Domain Id          : 4bd70e359f10100      
    Domain Name        : HCD001         
    Role               : Preferred               
    Local Vstore ID    : 1                    
    Local Vstore Name  : VSTORE001              
    Remote Vstore ID   : 1                    
    Remote Vstore Name : RMVSTORE001             
    Config Status      : Normal
    Active/Passive     : Active 
    Preferred mode     : Along With Active

System Response

The following table describes the parameter meanings.




ID of the HyperMetro vStore pair, 64 bits.

Health Status

Health status: Normal or Fault.

Running Status

Running status: Normal, Unsynchronized, Forced Start, Invalid.

Config Status

Configured synchronization status: Normal, Synchronizing, To Be Synchronized.

Link Status

Link status: Linkup or Linkdown.

Domain ID

ID of the HyperMetro domain.

Domain Name

Name of the HyperMetro domain.


Whether it is the preferred site.

Local Vstore ID

ID of the local vStore.

Local Vstore Name

Name of the local vStore.

Remote Vstore ID

ID of the remote vStore.

Remote Vstore Name

Name of the remote vStore.


Active or passive.

Preferred mode

Mode of setting the preferred site.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380741

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next