No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show clone secondary_lun

show clone secondary_lun


The show clone secondary_lun command is used to query the information about secondary LUNs of a clone.


show clone secondary_lun clone_id=? [ lun_id=? ]





clone_id=? Clone ID.

To obtain the value, run "show clone general".

lun_id=? Secondary LUN ID.

To obtain the value, run "show clone secondary_lun clone_id=?".



Usage Guidelines

  • To query the information about all secondary LUNs of a specific clone, run "show clone secondary_lun clone_id=?".
  • To query the details about a specific secondary of a specific clone, run "show clone secondary_lun clone_id=? lun_id=?".


  • Query information about all the secondary LUNs of clone "2".

    admin:/>show clone secondary_lun clone_id=2
    ID  LUN Name  Data Status  Pair ID  Health Status  Running Status  LUN Capacity  Second LUN Access
    --  --------  -----------  -------  -------------  --------------  ------------  -----------------
    2   cln0001   Consistent   0        Normal         Splited              1.000GB  Read and Write
  • Query information about secondary LUN "2" of clone "2".

    admin:/>show clone secondary_lun clone_id=2 lun_id=2
    ID : 2
    LUN Name : newlun0002
    Data Status : Synchronizing
    Pair ID : 0
    Health Status : Normal
    Running Status : Synchronizing
    Rate : Middle
    Process : 11
    Start Time : 2012-09-20/09:04:55 +08:00
    End Time : --
    Split Time : --
    Recovery Policy : Automatic
    LUN Role : Secondary
    LUN Capacity : 5.000GB
    Clone ID : 2
    Second LUN Access : Read Only
    Time Remaining for Synchronization: 00:00:00

System Response

The following table describes the parameter meanings.




ID of the secondary LUN.

LUN Name

Name of the LUN.

Data Status

Status of the data.

Pair ID

ID of the pair.

Health Status

Health status.

Running Status

Running status.


Rate of the pair.


Process of the synchronization.

Start Time

Start time of the synchronization.

End Time

End time of the synchronization.

Split Time

Time of the split.

Recovery Policy

Recovery policy.

LUN Role

Role of the LUN.

LUN Capacity

Capacity of the LUN.

Clone ID

ID of the clone.

Second LUN Access

Read and write attributes of the secondary LUN.

Time Remaining for Synchronization

Time remaining for synchronization.

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406357

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next