No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system secure_compliance_clock

show system secure_compliance_clock

Function

The show system secure_compliance_clock command is used to check the secure compliance clock of a system.

Format

show system secure_compliance_clock

Parameters

None

Level

Guest

Usage Guidelines

None

Example

To check the date and time of the secure compliance clock of a system, run the following command:

admin:/>show system secure_compliance_clock 
Secure Compliance Clock:2014-10-15/10:10:10 UTC+08:00

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Secure Compliance Clock

Secure Compliance Clock.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381017

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next