No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete mapping_view

delete mapping_view

Function

The delete mapping_view command is used to delete mapping views.

Format

delete mapping_view { mapping_view_id=? | mapping_view_name=? }

Parameters

Parameter

Description

Value

mapping_view_id=? ID of a mapping view.

To obtain the value, run "show mapping_view general".

mapping_view_name=? Mapping view name.

To obtain the value, run "show mapping_view general".

Level

Administrator

Usage Guidelines

  • Before running this command, ensure that the selected mapping view is exactly the one you want to delete and that no service associated with the hosts in the mapping view is running.
  • To delete a mapping view, you must remove all of the host groups, LUN groups and port groups in the mapping view, and the in-band commands of the mapping view must be disabled. The status of in-band commands can be changed by running "change mapping_view".

Example

  • Delete mapping view "1".

    admin:/>delete mapping_view mapping_view_id=1
    WARNING: You are about to delete mapping view. This operation cannot be undone. This operation will delete the information about the mapping view from the system.
    Suggestion: Before performing this operation, ensure that the selected mapping view is no longer necessary.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • Delete mapping view "mappingview1".

    admin:/>delete mapping_view mapping_view_name=mappingview1
    WARNING: You are about to delete mapping view. This operation cannot be undone. This operation will delete the information about the mapping view from the system.
    Suggestion: Before performing this operation, ensure that the selected mapping view is no longer necessary.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378258

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next