No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system file_handle

show file_system file_handle

Function

The show file_system file_handle command is used to query information about handles on a controller.

Format

show file_system file_handle [ controller=? ] [ file_system_id=? ] [ show_count=? ]

Parameters

Parameter

Description

Value

controller=? Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

file_system_id=? File system ID.

To obtain the value, run the "show file_system general" command without parameters.

show_count=? Whether the total number of handles is displayed.

The value can be "yes" or "no", where:

  • "yes": queries the total number of handles.
  • "no": queries information about handles on each file system.

Level

Guest

Usage Guidelines

None

Example

  • Query information about handles on controller "0A".

    admin:/>show file_system file_handle controller=0A
    Controller File System ID File Handle Count 
     ---------- -------------- ----------------- 
     0A         3              2 
     0A         2              2 
     0A         1              6
  • Query the total number of handles on controller "0A".

    admin:/>show file_system file_handle controller=0A show_count=yes
    Controller : 0A 
     Used File Handle Count : 8 
     Total File Handle Count : 600000
  • Query information about handles on file system "1" of controller "0A".

    admin:/>show file_system file_handle controller=0A file_system_id=1
    Controller : 0A 
     File System ID : 1 
     File Handle Count : 6

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Controller

Controller ID.

File System ID

File system ID.

File Handle Count

Number of handles on a file system.

Used File Handle Count

Number of used handles.

Total File Handle Count

Maximum number of handles.

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406293

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next