No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
swap remote_replication_vstore

swap remote_replication_vstore

Function

The swap remote_replication_vstore command is used to exchange the primary and secondary roles of the remote replication vStore pair.

Format

swap remote_replication_vstore vstore_paid_id=?

Parameters

Parameter

Description

Value

vstore_pair_id

Remote replication vStore pair ID.

The value is a character string consisting of digits and letters.

Level

Administrator

Usage Guidelines

None

Example

Exchange the primary and secondary roles of the remote replication vStore pair whose ID is "9017acaf20050000".

admin:/>swap remote_replication_vstore vstore_pair_id=9017acaf20050000 
CAUTION: You are about to perform primary-secondary switchover of the remote replication vStore pair. This operation causes the following results: 
1. The primary and secondary ends of the remote replication vStore pair exchange. 
2. The primary and secondary ends of the remote replication pair in the remote replication vStore pair exchange. 
Suggestion: Before performing this operation, check the primary-secondary relationship of the remote replication vStore pair that you want to switch over, and check the primary-secondary relationship of the remote replication pair in the vStore pair. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 333110

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next