No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smartqos_policy file_system

add smartqos_policy file_system

Function

The add smartqos_policy file_system command is used to add file systems to a SmartQoS policy.

Format

add smartqos_policy file_system smartqos_policy_id=? file_system_id_list=?

Parameters

Parameter

Description

Value

smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

file_system_id_list=? IDs of the file systems that you want to add.

To obtain the value, run "show file_system general".

You can specify multiple file system IDs separated by commas (,), or ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 64 IDs are allowed.

Level

Administrator

Usage Guidelines

None

Example

Add file systems "3", "4", and "5" to SmartQoS policy "0".

admin:/>add smartqos_policy file_system smartqos_policy_id=0 file_system_id_list=3,4,5
CAUTION: You are about to add file system into traffic control policy.
This operation may affect file system performance.
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and file system are selected.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379897

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next