No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete consistency_group

delete consistency_group


The delete consistency_group command is used to delete consistency groups.


delete consistency_group consistency_group_id=? [ is_local_delete=? ]





consistency_group_id=? ID of a consistency group.

To obtain the value, run "show consistency_group general".

is_local_delete=? Whether or not to delete the local consistency group.

The value can be:

  • yes: The local consistency group will be deleted.
  • no: The local consistency group will not be deleted.



Usage Guidelines

  • This command will delete the selected consistency group from the system.
  • If the consistency group contains remote replication pairs, remove the pairs by following the procedure described in "remove consistency_group remote_replication".
  • Before running this command, ensure that the selected consistency group is exactly the one you want to delete.
  • If the consistency group contains members, it can be deleted only when it is in the Split state or when its Health Status is Fault. If the consistency group contains no members, it can be deleted when it is in the Normal state.


To delete consistency group "200bc79b99520000", run the following command.

admin:/>delete consistency_group consistency_group_id=200bc79b99520000
DANGER: You are about to delete consistency group.This operation will delete information about the consistency group from the system.
Suggestion: Before performing this operation, ensure that the selected consistency group is correct.
Have you read danger alert message carefully(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382327

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next