No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show on_access_scan general

show on_access_scan general


The show on_access_scan general command is used to query On-Access scanning settings.


show on_access_scan general [ id=? ]






ID of a On-Access scanning task.

To obtain the value, run the "show on_access_scan general" command.



Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the Anti-Virus module is running correctly.


Query On-Access scanning settings.

admin:/>show on_access_scan general 

  ID  File System ID  File System Name  Scan Policy ID  Scan Enabled 
  --  --------------  ----------------  --------------  ------ 
  0 0               fs01              2               0

System Response

The following table describes the parameter meanings.




On-Access scanning task ID.

File System ID

File system ID.

File System Name

File system name.

Scan Policy ID

Scanning policy ID.

Scan Enabled

On-Access scanning switch. "no" and "yes" indicate that On-Access scanning is disabled and enabled respectively.

Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 320145

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next