No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create hyper_metro_domain general

create hyper_metro_domain general

Function

The create hyper_metro_domain general command is used to create a HyperMetro domain.

Format

create hyper_metro_domain general remote_device_id=? name=? [ description=? ]

Parameters

Parameter

Description

Value

remote_device_id=? ID of the remote storage device.

Run the "show remote_device general" command without parameters to obtain the value.

name=? Name of the HyperMetro domain.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), and can only start with a digit or a letter.

description=? Description information.

The value contains 1 to 127 letters.

Level

Administrator

Usage Guidelines

None

Example

  • Create a HyperMetro domain whose remote device ID is "1" and name is "domainA".

    admin:/>create hyper_metro_domain general remote_device_id=1 name=domainA
    Command executed successfully.
  • Create a HyperMetro domain whose remote device ID is "1" and name is "domainA" between two storage arrays of different models.

    admin:/>create hyper_metro_domain general remote_device_id=1 name=domainA
    WARNING: You are about to use two storage arrays of different models to create a HyperMetro domain. Different product models have different performance and specifications. When the service pressure exceeds the capability of the array with the lower specifications, the HyperMetro pair may be disconnected.
    Suggestion: Confirm that you want to perform this operation.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380775

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next