No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication_vstore general

change remote_replication_vstore general

Function

The change remote_replication_vstore general command is used to change properties of remote replication vStore pairs.

Format

change remote_replication_vstore general vstore_paid_id=? [ second_fs_access=? ]

Parameters

Parameter

Description

Value

vstore_pair_id Remote replication vStore pair ID.

The value is a character string consisting of digits and letters.

second_fs_access Read/write properties of the secondary end.
  • "Readwrite": 3.
  • "Readonly": 2.

Level

Administrator

Usage Guidelines

None

Example

Change properties of remote replication vStore pair whose ID is "9017acaf20050000" to readable and writable.

admin:/>change remote_replication_vstore general vstore_pair_id=9017acaf20050000second_fs_access=Readwrite
CAUTION: You are about to modify the read-write attribute of the secondary end of the remote replication vStore pair. This operation causes the following results:
1. The read-write attribute of the secondary end of the remote replication vStore pair is modified.
2. The attribute of the secondary end of the remote replication pair in the remote replication vStore pair is modified.
Suggestion: Before performing this operation, confirm the read-write attribute of the secondary end of the remote replication vStore pair, and confirm the read-write attribute of the secondary end of the remote replication pair in the vStore pair.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382373

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next