No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change iscsi initiator_name_v2

change iscsi initiator_name_v2

Function

The change iscsi initiator_name_v2 command is used to change the name of an iSCSI initiator configured for the storage system.

Format

change iscsi initiator_name_v2 iscsi_name=?

Parameters

Parameter

Description

Value

iscsi_name=? Last field of the new name of an iSCSI initiator.
NOTE:
The first six fields of an initiator name cannot be changed. Only the last field can be modified.

The value contains 1 to 31 characters including digits, letters, hyphens (-), colons (:), and periods (.).

Level

Administrator

Usage Guidelines

  • Running this command interrupts all services associated with the specified initiator.
  • Before running this command, ensure that all services associated with the specified initiator are stopped.
  • Initiators and targets are relative. In the scenario where storage systems A and B connect to each other in iSCSI mode, from the perspective of storage system A, storage system A is the initiator and storage system B is the target. Likewise, from the perspective of storage system B, storage system B is the initiator and storage system A is the target.
  • The first six fields of an initiator name cannot be changed.

Example

Change the last field of the name of an initiator on the storage system controller to "config".

 
admin:/>change iscsi initiator_name_v2 iscsi_name=config
DANGER: You are about to change the initiator name. This operation will interrupt all replication and heterogeneous services associated with the initiator.
Suggestion: Before performing this operation, ensure that all replication and heterogeneous services associated with the initiator are stopped.
Have you read danger alert message carefully?(y/n)y
 
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.
 

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381060

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next