No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete host_group

delete host_group

Function

The delete host_group command is used to delete a host group.

Format

delete host_group { host_group_id=? | host_group_name=? }

Parameters

Parameter

Description

Value

host_group_id=? ID of a host group that you want to delete.

To obtain the value, run "show host_group general".

host_group_name=? Name of a host group that you want to delete.

To obtain the value, run "show host_group general".

Level

Administrator

Usage Guidelines

None

Example

  • Delete host group "1".

    admin:/>delete host_group host_group_id=1
    WARNING: You are about to delete host group. This operation cannot be undone. This operation will remove all hosts within the host group and the information about the host group from the system.
    Suggestion: Before performing this operation, ensure that the selected host group is no longer necessary.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • Delete host group "name1".

    admin:/>delete host_group host_group_name=name1
    WARNING: You are about to delete host group. This operation cannot be undone. This operation will remove all hosts within the host group and the information about the host group from the system.
    Suggestion: Before performing this operation, ensure that the selected host group is no longer necessary.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406264

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next