No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show clone general

show clone general


The show clone general command is used to query clone information.


show clone general [ clone_id=? ]





clone_id=? ID of a clone to be queried.

To obtain the value, run "show clone general" without parameters.



Usage Guidelines

  • To query the basic information about all clones, run "show clone general".
  • To query the detailed information about a specified clone, run "show clone general clone_id=?".


  • Query information about all clones.

    admin:/>show clone general
      Clone ID  Clone Name  Health Status  Running Status  Primary LUN ID  Primary LUN Name  Primary LUN Capacity  vStore ID  Immediately Available  
      --------  ----------  -------------  --------------  --------------  ----------------  --------------------  ---------  ---------------------   
      0         cln0        Normal         --              0               lun0000                        2.000GB  --         No        
      1         cln1        Normal         --              1               lun0001                        2.000GB  --         Yes
  • Query information about clone "0".

    admin:/>show clone general clone_id=0
      Clone ID             : 0      
      Clone Name           : cln0   
      Health Status        : Normal 
      Running Status       : --     
      Primary LUN ID       : 0      
      Primary LUN Name     : lun0000 
      Primary LUN Capacity : 2.000GB 
      vStore ID            : --     
      Immediately Available: No

System Response

The following table describes the parameter meanings.



Clone ID

ID of the clone.

Clone Name

Name of the clone.

Health Status

Health status.

Primary LUN Capacity

Capacity of the primary LUN.

Primary LUN ID

ID of the primary LUN.

Primary LUN Name

Name of the primary LUN.

Running Status

Running status.

vStore ID

vStore ID.

Immediately Available

Whether the clone is available immediately.

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406239

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next