No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fs_snapshot restore

change fs_snapshot restore


The change fs_snapshot restore command is used to roll a file system to a specific snapshot.


change fs_snapshot restore snapshot_id=?






Indicates the ID of the snapshot the file system rolls back to.

File system ID @ snapshot name. The file system ID is an integer from 0 to 65535 and the snapshot name consists of 1 to 127 ASCII characters including letters, numbers, and underscores (_).



Usage Guidelines

Before running this command, check whether the ID of the snapshot is correct.


Roll the file system to snapshot "0@snap1".

admin:/>change fs_snapshot restore snapshot_id=0@snap1 
DANGER: You are about to run a command to roll back a read-only file system snapshot. Data in the corresponding file system will be rolled back to the state preserved by the specified snapshot, all the read-only snapshots generated after the specified read-only snapshot will be deleted, and all data generated after the specified snapshot will be lost. If you access file system data during snapshot rollback, you may access data lost after file system snapshot rollback. This may cause logical errors or even interrupt services. 
1. Before performing this operation, to avoid accessing data lost after snapshot rollback, stop services of the file system. 
2. Ensure that the file system snapshot you have selected is correct. 
Have you read danger alert message carefully?<y/n>y 
Are you sure you really want to perform the operation?<y/n>y 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 333254

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next