No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete bond_port

delete bond_port


The delete bond_port command is used to delete an Ethernet bond port.


delete bond_port bond_port_id=?





bond_port_id=? ID of the bond port that you want to delete.

To obtain the value, run "show bond_port".



Usage Guidelines

Before running this command, stop services carried by the Ethernet bond port you want to delete.


To delete the Ethernet bond port whose ID is "0", run the following command.

admin:/>delete bond_port bond_port_id=0
DANGER: You are about to delete the bond port. This operation interrupts all connections of the above ports.
Suggestion: Before performing this operation, stop all services on the above ports.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380876

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next