No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change performance threshold

change performance threshold

Function

The change performance threshold command is used to change the thresholds of performance statistical object parameters.

Format

change performance threshold threshold_id=? [ threshold_value=? | wave_threshold_value=? ]

Parameters

Parameter

Description

Value

threshold_id=?

Threshold ID.

To obtain the value, run "show performance threshold", the value ranges from 0 to 65535.

threshold_value=?

New anomaly threshold.

The value ranges from 0 to 4294967295.

wave_threshold_value=?

New fluctuation threshold.

The value ranges from 0 to 100.

Level

Administrator

Usage Guidelines

Before performing this operation, ensure that the selected threshold ID is correct.

Example

Change anomaly threshold "1" of performance statistical object parameters to "10".

admin:/>change performance threshold threshold_id=1 threshold_value=10 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 312071

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next