No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change certificate password

change certificate password

Function

The change certificate password command is used to change the password for encrypting the private key of a certificate.

Format

change certificate password type=?

Parameters

Parameter

Description

Value

type=? Certificate type.

The value can be:

  • "key_management_center": key management center.
  • "domain_authentication": domain authentication.
  • "hypermetro_arbitration": HyperMetro arbitration.
  • "https_protocol": HTTPS protocol.
  • "ftps_protocol": FTPS protocol.
  • "syslog_authentication": SYSLOG server authentication.
  • "domain_authentication_extension_1": domain authentication extension 1.
  • "domain_authentication_extension_2": domain authentication extension 2.
  • "domain_authentication_extension_3": domain authentication extension 3.

Level

Administrator

Usage Guidelines

  • This command can be used to change the password for encrypting the private key of the certificate in a specific scenario.
  • This command provides an interactive mode for entering passwords. When you are entering a password, nothing is displayed on the screen.
  • By default, the password contains 8 to 16 case-sensitive characters.
  • The password must contain spaces and special characters, including ` ~ ! @ # $ % ^ & * ( ) - _ = + \ | [ { } ] ; :' " , < . > / ?.
  • The password must meet the following complexity requirements:
    • When the password complexity is set to normal, the password must contain at least two of the following types: lowercase characters, uppercase characters, and digits.
    • When the password complexity is set to high, the password must contain lowercase characters, uppercase characters, and digits.
  • The password cannot contain four consecutive same characters.
    The "change safe_strategy" command can be used to change the password policy and login policy of the storage system.

Example

Change the password for encrypting the private key of a certificate.

admin/>change certificate password type=key_management_center
New password:*************
Reenter password:*************
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380772

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next