No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hypervault general

change hypervault general

Function

The change hypervault general command is used to modify HyperVault settings.

Format

change hypervault general hypervault_id=? { recover_policy=? | backup_rate=? | restore_rate=? | compress_enable=? }

Parameters

Parameter

Description

Value

hypervault_id=?

ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

recover_policy=?

Fault rectification policy.

The value is "automatic" or "manual", where:

  • "automatic": Backup is automatically recovered after the interrupted link is recovered. Data is automatically backed up from the primary device.
  • "manual": After the interrupted link is recovered, you need to manually recover backup. Data will not be automatically backup from the primary device to the secondary device.

The default value is "automatic".

backup_rate=?

Backup rate.

The value is "low", "middle", "high", or "highest", where:

  • "low": low backup rate.
  • "middle": medium backup rate.
  • "high": high backup rate.
  • "highest": highest backup rate.

The default value is "middle".

restore_rate=?

Restoration rate.

The value is "high" or "highest", where:

  • "high": high restoration rate.
  • "highest": highest restoration rate.

The default value is "high".

compress_enable=?

Whether to enable compress.

The value can be "yes" or "no", where:

  • yes: enable compress.
  • no: disable compress.

Level

Administrator

Usage Guidelines

None

Example

Change the recovery policy of HyperVault "9747215445131264" to "automatic".

admin:/>change hypervault general hypervault_id=9747215445131264 recover_policy=automatic 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 312481

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next