No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete ldap configuration

delete ldap configuration


The delete ldap configuration command is used to delete the configuration information about a domain authentication server.


delete ldap configuration [ server_id=? ]





server_id ID of a domain authentication server. This parameter is supported in OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems.

The value is an integer from 0 to 3. To obtain the value, run "show ldap configuration".


Super administrator

Usage Guidelines

  • After this command is executed, configuration information about the domain authentication server is deleted from the system and cannot be restored.
  • After this command is executed, the domain account from the deleted domain authentication server cannot be used to access the storage system.
  • If no domain server ID is specified, the default ID is 0.


Delete the configuration information about domain authentication server "3".

admin:/>delete ldap configuration server_id=3
DANGER: You are about to delete domain authentication server configurations.
All domain users on the deleted domain authentication server cannot log in again.
Suggestion: Ensure that the selected domain authentication server is the one that you want to delete.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406291

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next