No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hypervault general

delete hypervault general


The delete hypervault general command is used to delete a HyperVault pair.


delete hypervault general hypervault_id=? [ is_local_delete=? ] [ reserve_copy=? ]





hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

is_local_delete=? Whether a HyperVault pair can be locally deleted when the link is down.

The value can be:

  • "yes": The HyperVault pair can be locally deleted.
  • "no": The HyperVault pair cannot be locally deleted.
The default value is "no".
reserve_copy=? Whether to reserve the copy.

The value is "yes" or "no", where:

  • "yes": The copy will be reserved.
  • "no": The copy will not be reserved.
The default value is "yes".



Usage Guidelines



Delete HyperVault pair "9747215445131264".

admin:/>delete hypervault general hypervault_id=9747215445131264
DANGER: You are about to delete HyperVault.
The deletion cannot be undone. This operation will remove the HyperVault function from the file systems and the local and remote backup functions of file systems will become unavailable. After HyperVault is deleted, data written to the primary file system will not be backed up, and data on copies in the secondary file system cannot be restored to the primary file system. If there are incomplete tasks, file system data may become incomplete after HyperVault is deleted.
Suggestion: Before performing this operation, ensure that you have selected the correct HyperVault.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380618

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next