No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ntp status

show ntp status

Function

The show ntp status command is used to query the NTP status.

Format

show ntp status

Parameters

None

Level

Guest

Usage Guidelines

If the NTP configuration is modified, query the NTP status one minute later.

Example

Query NTP status.

admin:/>show ntp status 
 NTP Server Address           : test.com,test1.com 
 Current Connected NTP Server : test.com(ip:192.168.1.66) 
 Offset                       : +35685.45077 second(s) 
 Status                       : Normal

System Response

The following table describes the parameter meanings.

Parameter

Meaning

NTP Server Address

NTP server address.

Current Connected NTP Server

Current connected NTP server.

Offset

Time difference between the disk array and the current connected NTP server.

If "+xxx.xxx second (s)" is displayed, it indicates that the time of the disk array is xxx.xxx second (s) slower than that of the NTP server.

If "-xxx.xxx second (s)" is displayed, it indicates that the time of the disk array is xxx.xxx second (s) faster than that of the NTP server.

Status

NTP status.

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 332296

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next