No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove consistency_group remote_replication

remove consistency_group remote_replication


The remove consistency_group remote_replication command is used to delete remote replication tasks from a consistency group.


remove consistency_group remote_replication consistency_group_id=? remote_replication_id=?






ID of a consistency group.

To obtain the value, run "show consistency_group general".


ID of the remote replication that you want to delete.

To obtain the value, run "show remote_replication general".



Usage Guidelines

  • This command will make the status of the remote replication and consistency group become inconsistent.
  • Before running this command, ensure that the selected remote replication task is exactly the one you want to delete.
  • You can run this command only on the primary end for a consistency group.


To remove the remote replication tasks whose ID is "9747215445131235" from consistency group "9747215445131264", run the following command.

admin:/>remove consistency_group remote_replication consistency_group_id=9747215445131264 remote_replication_id=9747215445131235DANGER: You are about to remove remote replication task from consistency group. After this operation, the status of the remote replication task becomes inconsistent with that of the consistency group. 
Suggestion: Before performing this operation, ensure that the selected remote replication task is correct. Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 328150

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next