No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete file

delete file


The delete file command is used to delete exported files from the system memory or system disk.


delete file filetype=? [ interlog_name=? ] [ controller_id=? ]





filetype=? Type of the file.

The value can be "event", "log", "running_data", "configuration_data", "all_log", "smart", "workload", "call_home", "isolated_disklog", "running_disklog", "diagnostic_file", or "pool_critical_log", where:

  • "event": event files.
  • "log": log files.
  • "running_data": system running data files.
  • "configuration_data": system configuration files.
  • "all_log": all logs of the system.
  • "smart": disk smart information.
  • "workload": workload (only supported by the storage array).
  • "call_home": Call Home data.
  • "isolated_disklog": isolated disk log information.
  • "running_disklog": running disk log information.
  • "diagnostic_file": diagnostic files.
  • "pool_critical_log": key logs of the pool.
controller_id=? Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C". Controller IDs are separated by commas (,). This parameter can be specified only when "filetype" is set to "log", "all_log", "call_home", "smart", "isolated_disklog", "running_disklog", or "workload". Note that if the command does not have this parameter, all downloaded log files will be deleted.

interlog_name=? Name of the exported running disk log.

This parameter can be specified only when "filetype" is set to "running_disklog".



Usage Guidelines



  • Delete exported event files from the system memory.

    admin:/>delete file filetype=event
    Command executed successfully.
  • Delete the running disk log file that has been exported.

    admin:/>delete file filetype=running_disklog interlog_name=CTE1.1_210235G7JK10D7000085.tgz controller_id=1A
    Command executed successfully.
  • Delete the exported diagnostic file.

    admin:/>delete file filetype=diagnostic_file
    Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 377582

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next