No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fan_info general

change fan_info general

Function

The change fan_info general command is used to set the basic speed level of fans in enclosures.

Format

change fan_info general enclosure_id=? flag=? level=?

Parameters

Parameter

Description

Value

enclosure_id=? Enclosure ID. This parameter is supported in OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems.

To obtain the value, run "show enclosure" without parameters.

flag=? Flag indicating whether the setting is valid. This parameter is supported in OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems.

The value can be "enable" or "disable", where:

  • "enable": indicates that the speed adjustment is valid.
  • "disable": indicates that the speed adjustment is invalid.
level=? Basic speed level of fans. This parameter is supported in OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems.

The basic speed level ranges from 8 to 32.

Level

Administrator

Usage Guidelines

You can set the basic speed level of fans in a specified enclosure by running the "change fan_info general enclosure_id=? flag=? level=?" command.

Example

Set the basic speed level of fans to "12".

admin:/>change fan_info general enclosure_id=CTE0 flag=enable level=12
WARNING: You are about to change the fan speed adjustment policy. This operation will improve the basic level of the original fan speed adjustment policy.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380706

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next