No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete initiator fc

delete initiator fc


The delete initiator fc command is used to delete Fibre Channel initiators. You can disable hosts from accessing the storage resources of the storage system by running this command.


delete initiator fc wwn=?





wwn=? World Wide Name (WWN) of a Fibre Channel initiator.

To obtain the value, run "show initiator".



Usage Guidelines

  • Running this command will interrupt the services associated with a host.
  • Before running this command, ensure that the selected initiator is exactly the one you want to delete and no service is running on the host for the initiator. Otherwise, the command execution will fail.
  • An initiator that you want to delete must have been created and disconnected.


To delete the Fibre Channel initiator whose WWN is "656de54589654569", run the following command.

admin:/>delete initiator fc wwn=656de54589654569
CAUTION: You are about to delete the initiator. This operation will cause the initiator unavailable.
Suggestion: Before performing this operation, ensure that the initiator needs to be deleted.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382371

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next