No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change alarm_mask

change alarm_mask

Function

The change alarm_mask command is used to mask specified alarms.

Format

change alarm_mask alarm_id_list=? mask_switch=?

Parameters

Parameter

Description

Value

alarm_id_list=?

List of IDs of masked alarms.

  • Alarms saved in the configuration file.
  • Multiple IDs are separated by commas (,).
  • A maximum of 64 alarm IDs are supported.

mask_switch=?

Switch of the alarm masking function.

The value can be "on" or "off", where:

  • "on": The alarm masking function is enabled.
  • "off": The alarm masking function is disabled.

Level

Administrator

Usage Guidelines

  • An alarm ID is a hexadecimal number. Separate alarm IDs in the ID list from each other with commas (,). A maximum of 64 alarm IDs are supported.
  • When the alarm masking function is enabled, masked alarms are neither reported to the network management system nor sent by email, short message, or syslog.
NOTE:

The alarm masking function does not affect email test alarms and short message test alarms.

Example

Masking two specified alarms.

admin:/>change alarm_mask alarm_id_list=0x100F00A000F,0x100F0C90066 mask_switch=on 
WARNING: You are about to enable the alarm masking function. This operation will make the masked alarms are neither reported to the DeviceManager nor sent by email, short message, or syslog. But the alarm masking function does not affect email test alarms and short message test alarms. 
Suggestion: Before performing this operation, ensure that the alarms need to be masked. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Change alarm 0x100F00A000F mask switch successfully. 
Change alarm 0x100F0C90066 mask switch successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 321820

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next