No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show tls_cert

show tls_cert

Function

The show tls_cert command is used to query security certificate information about a quorum server.

Format

show tls_cert

Parameters

None

Level

Administrator

Usage Guidelines

This command must be executed on a quorum server.

Example

Query security certificate information about a quorum server.

admin:/>show tls_cert

    State                   : Valid
    Expiration Time    : 2025-04-27

System Response

The following table describes the parameter meanings.

Parameter

Meaning

State

Status of the security certificate. The value can be "Valid" or "Invalid".

Expiration Time

Expiration time of the security certificate.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379767

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next