No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ndmpcopy_task general

show ndmpcopy_task general

Function

The show ndmpcopy_task general command is used to query information about created ndmpcopy tasks.

Format

show ndmpcopy_task general

Parameters

None

Level

Read-only user

Usage Guidelines

None

Example

Query information about created ndmpcopy tasks.

admin:/>show ndmpcopy_task general
  task_id          : 66                      
  src_path         : 8.47.107.82:/fs4        
  dst_path         : 8.47.107.83:/fs5        
  transfer_level   : 1                       
  transfer_exclude : txt                     
  transfer_type    : Cumulative incremental  
  status           : Fail                    
  start_time       : 2019-11-05 20:59:15     
  end_time         : 2019-11-05 20:59:15

System Response

The following table describes the parameter meanings.

Parameter

Meaning

task_id

ID of the ndmpcopy task.

src_path

Source path of the ndmpcopy task.

dst_path

Target path of the ndmpcopy task.

transfer_level

Transfer level of the ndmpcopy task.

transfer_exclude

Filter criteria of the ndmpcopy task.

transfer_type

Transfer type of the ndmpcopy task.

status

Status of the ndmpcopy task.

start_time

Start time of the ndmpcopy task.

end_time

End time of the ndmpcopy task.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381318

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next